1.What is a frame level and what are its main uses? A frame level is a square universal angle measuring instrument that uses the principles of liquid flow and a horizontal liquid surface. It directly displays slight inclination angles relative to the horizontal and vertical positions through a bubble level. It is mainly used to inspect the straightness of various machine tools and other equipment, the correctness of the installed horizontal and vertical positions, and can also detect tiny inclination angles. For example, during the installation of large mechanical equipment such as CNC lathes and machining centers, a frame level is required for precise leveling to ensure the stable operation of the machine and avoid machining errors caused by vibration. 2.What types of frame levels are there, and what are the differences between different types? Common levels include two types: frame levels and bar levels. A bar level is generally used to detect the levelness in a single direction; while a frame level can detect the levelness in two mutually perpendicular directions simultaneously, that is, perpendicularity and parallelism, and has a wider range of applications. For example, when detecting some equipment that requires multi-directional level calibration, the frame level has obvious advantages. 3.What are the specifications of the measurement accuracy of the frame level? Common measurement accuracies include 0.2/300, 0.5/200, etc. The number in front represents the height difference of inclination per unit length (such as 1m), and the number behind represents the measurement length. For example, 0.2/300 means that in a measurement length of 300mm, the accuracy can reach the detection of a height difference of inclination of 0.2mm. 4.What preparations need to be done before using the frame level? oCheck whether the appearance of the instrument is damaged, ensure that the inside of the bubble level is clean without impurities, and the scale is clear and visible. oWash the antirust oil on the working surface with non-corrosive gasoline, and wipe it clean with a degreased cotton yarn. oIf the ambient temperature during use is different from the storage ambient temperature, the level should be placed on a flat plate in the use environment for 2 hours before use. Because temperature changes can cause measurement errors, it should be isolated from heat sources and air sources. 5.How to use the frame level correctly for measurement? oMeasuring the horizontal plane: Place the frame level steadily on the measured object, ensure that the contact surface is clean and flat, and do not tilt or shake the level. At the same measurement position, the level should be turned to the opposite direction for measurement again. Move along the long side direction of the level and observe the offset of the bubble. If the bubble always deviates from the center, it indicates that the plane has an inclination phenomenon. Quantitatively describe the degree of inclination by reading the scale value. When reading, first determine the position of the bubble, and then calculate the specific deviation value according to the distance between the bubble and the center point. It is recommended to measure repeatedly several times and take the average value to improve the reliability of the data. oMeasuring the vertical plane: Hold the inner side of the auxiliary measuring surface by hand, and make the level stably and vertically (adjust the bubble to be in the middle position) stick to the vertical plane of the workpiece, and then read the number of grids that the bubble moves from the longitudinal level. Do not hold the part opposite to the auxiliary side surface and push it against the vertical plane of the workpiece with force, otherwise the measurement accuracy will be affected due to the deformation of the level caused by the force. 6.During use, what is the reason for the unstable reading of the bubble, and how to solve it? It may be caused by the change of the ambient temperature, which leads to the thermal expansion and contraction of the liquid, or there may be quality problems with the instrument itself. The solution is to try to use it in an environment with relatively stable temperature; regularly calibrate the zero point; for products with serious faults, send them for repair and replacement in a timely manner. 7.What is the reason for the large deviation of the measurement result, and how to solve it? It may be due to improper operation, such as not placing the level correctly, measuring in a vibrating environment, etc.; it may also be caused by the aging and wear of the equipment. The solution is to operate in strict accordance with the instructions for use; for old equipment, it is recommended to repair or replace it in a timely manner. 8.How should the frame level be maintained after use? After use, the working surface must be wiped clean, and anti-rust oil without water and acid should be applied. Cover it with moisture-proof paper, put it in a box, and store it in a clean and dry place. Avoid exposing it to a humid environment for a long time to prevent the metal parts from rusting. If it is not used for a long time, it is also recommended to take it out regularly for inspection, wiping, and applying anti-rust oil. 9.How to choose a suitable frame level? oConsider the accuracy requirements: Select according to the accuracy requirements of the actual measurement task. For example, high-precision machining requires a frame level with higher accuracy, such as the 0.02mm/m accuracy grade; for the installation and debugging of general ordinary equipment, the conventional accuracy can be selected. oPay attention to the brand and quality: Choose products from well-known brands with reliable quality. A level with good quality has high accuracy and stability of the bubble level, a sturdy and durable metal frame, and small measurement errors. oConsider the size specifications: Select a frame level of a suitable size according to the size of the measured object and the measurement range to ensure that it can cover the measurement area and is easy to operate.